Structural

Structural Machines

STOP!  Wasting time Drilling!

Use the economical way and punch it! 

Work Smarter and Faster, NOT Harder! 

Fact: Punches and dies last Thousands of holes longer than drills and ALL the holes are clean!

Fact: It takes much MORE time to drill a hole, than it does to punch it.

Fact: A CNC Beamline or Anglematic is MUCH more accurate than a hand held drill

Can’t move the steel that needs punched to the Machine?

A Portable Re-furbished “C”

Frame punches Is the Answer!

Yes, take the Machine to the steel

CNC Machines 

Completely Re-furbished

For Angle punching.  

846D

Single and / or dual gage lines of punched holes.

Gauge line settings are manually pre-set on clear easily read scales located on each press. 

 The CNC part program selects upper or lower hole positions for each press. 

The two different hole locations are obtained by the CNC controlling a pneumatic cylinder.

846F 

Infinite gauge lines.  

Gauge lines are controlled by the CNC via servo driven ballscrews. 

 There is no presetting required on the presses!

For Beam punching